TM2-4 Monitoring System Overview
The TM2-4 offers monitoring of upto 4 machines from the one unit. This unit is monitoring at its most basic, "Is my machine running or not?" This, although limited would be most effective for machine shops with multiple machines with just the one operator. The ability to know exactly when a component is complete will not only improve your efficiency but increase those most welcome profits.The TM2-4 can also be configured to monitor upto four areas of two machines and by utilising the unique controllable outputs machinery can even be remotely switched off depending on control types.
The T-Mon range of systems are highly customisable and you as the customer really can specify the areas of your machinery you wish to monitor, no two systems need to be the same, you really are in control.
INTERFACE
- 8-Programmable Digital Inputs
- 2-Counter Inputs
- 2-Programmable Outputs
- 2-Analogue Inputs
- Analogue Temperature Probe Input
- SMS multiple commands, case insensitive
- SMS timer and schedule commands
- CLIP (pulse, toggle and reverse mode)
- DTMF (multiple keyboard commands)
- SMS, Status SMS (specific for each recipient)
- Phone call
- Email (specific for each recipient)
- WebLink via any Web-enabled device
- Power fail detection (blackout)
- Local and remote configuration
- LOG tracing to com port
- LOG memory (last 99 activities)
- Real time clock (autosync)
- Scheduled activities
- Users management and Interactive messages
- DC Voltage: 9,5 ... 35 V polarity independent
- AC Voltage: 9,5 ... 27 V
- Idle Power: < 200 mW
- Peak Power: < 5 W
- Li-Poly backup battery
- Quad band GSM / GPRS / EDGE communication with automatic or manual selection on bands 850 / 900 / 1800 / 1900 MHz for data, sms, fax and voice applications.
- Full Type Approved and compliant with ETSI GSM Phase 2+ and with Part 15 of the FCC Rules.
- CE0681 Compliant
CONTROL
REPORTS / ALARMS
SPECIAL FEATURES
POWER CONSUMPTION
THE TECHNICAL BIT